Canon MX490 Printer Setup – The Canon Pixma MX490 wireless printer setup is a compact printer for home and office use. You have to set it up properly after you purchase the printer from the supplier. Configure your printer’s hardware and software step-by-step as prompted. Firstly, unpack the printer from the box and then settle it down at one preferable place. You can also make a direct connection with Canon Support team for getting effective and reliable guidelines of printer setup wirelessly process. The team of techies are extra-talented and well-educated so within a short span of time you will get handy ways to setup your Canon printer.

Methods to Canon MX490 Printer Setup

Go through the below-noted instructions step-wise to setup your Canon PIXMA MX490 Wireless Printer in an effortless manner. Just have a look at those points:

Canon PIXMA MX490 Printer Setup

  1. Be assure that the printer box is sealed properly
  2. Now, open the box and check if the printer components are provided in it
  3. Take out the Canon MX490 Printer Setup from the box and then place it on a flat surface
  4. Remove the protective cover from the printer
  5. Peel off the orange colored protective tapes
  6. Take the power cable provided in the printer package and then connect it to the respective port of the printer & power supply
  7. Power on the printer by pressing its power button forcefully
  8. Configure the settings on the control panel of the printer
  9. Unpack the ink cartridges and insert into the corresponding slots
  10. Load the A-4 size paper into the input tray
  11. Install the printer software on your computer and complete the first time Canon PIXMA MX490 setup printer

Steps To Setup a Canon MX490 Wireless Printer

One of the best ways to connect your Pixma MX490 printer and computer is the wireless link. The following subjects explain the simple and fast procedure for setting up the wireless link on the Canon Pixma MX490 printer. Have a glimpse on the noted points and perform the same:

  • On the function panel of the Canon Pixma MX490 printer, click on the “Setup” button
  • Use the arrow buttons and select Wireless LAN Setup
  • Now, click “OK”
  • Download the updated version of the Canon MX490 Printer Driver that suits your windows operating system
  • Set the connection method as a Wireless LAN connection
  • Enable the radio button of Connect Via Wireless Router
  • Follow the provided on-screen instructions and complete the wireless connection on the Canon Pixma MX490 printer hassle-freely